2022/05/03
    -from TAILIFT
    Here are few tips to avoid Summer condensation on medium power resonator.
    In order to avoid water from condensation where the Regional temperature is above 25 degrees the below procedures are to be followed:
    The dew point temperature> 25℃ will definitely cause condensation; measures must be taken before use.
    1. If the cooling capacity and flow rate of the water chiller are sufficiently redundant, the water temperature can be increased by 1-2 ℃, this measure is simple and easy to implement.  But the effect is limited.  
    2. The cabinet adopts a sealed design, and an external industrial air conditioner is used to control the temperature and humidity inside the cabinet, which is equivalent to the laser working in an isolated space with constant temperature and humidity, which can effectively avoid condensation.  
    3. At the installation site, if space and cost permit, a small air-conditioned room can be built. Lasers and cabinets working in this isolation room can also be very effective to avoid conclusions.  
    #TAILIFT #cnc #tailiftsheetmetal #fiberlaser #fiberoptic #QBH #Resonator #laser #lasercuttingmetal #laserresonator #nlight #NLIGHT #Nlight #condensation #taiwan #Nantou #2k21 #RAYTOOL #Raytools