Hydraulic Clamping Radial Drilling Machine TPR-1600H

Hydraulic Clamping Radial Drilling Machine TPR-1600H
  1. The Radial Drill Arm adopts IC Timer with advantage of one bottom press, it can automatically release up/down movement, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
  2. Special arm elevating safety device is provided to prevent arm from falling down abruptly after year of usage. It will keep us from injurious dropping whenever the copper nut is excessively worn.
  3. Exclusively for gears type cycling ril pump is furnished to cool off precise gears inside gear box,and minimize excessive wear on gears to lowest extent.
MODEL TPR-1600H  
Dai.of column 432 A
Distance from column surface to spindle center , Max 1550 D+C
Distance from column surface to spindle center , Min 440 C
Travel of spindle head 1110 D
Distance from base surface to spindle end , Max 1640 E
Distance from base surface to spindle end , Min 380 F
Elevating height of Arm 875 E-F-I
Effective area of box table 700×500×400 L×K×H
Dimension of base 2470×1030×200 R×S×Q
Taper hole spindle MT#5  
Stroke of spindle 370 I
R.P.M of spindle (rpm x steps) 50HZ 29-1575×12 steps  
60HZ 35-1890×12 steps  
Feed of spindle (rev. x steps) 0.07~0.96×6 steps  
Main motor (HP) 7 1/2HP  
Elevating motor (HP) 2 HP 3 HP  
Hydraulic clamping motor (HP) 1 HP  
Coolant equipment (HP) 1/8 HP  
Machine height from floor (Max.) 3130 M
Base + column height 2660 G
Net weight (approx)kgs 4250  
Shipping weight (approx)kgs 4700  
Shipping dimensions (LxWxH) 2820×1450×2930  
Capacity Drilling Stell 65Φ  
Cast iron 70Φ  
Tapping Stell 50Φ  
Cast iron 60Φ  

Standard accessory

Adjustment tools (box included) 1 set
Cooling device (pimp included) 1 set
Lighting device (fluorescent lamp included) 1 set
Box-type Work Table 1 set

Special Optionals/Tilt Tables

Uni-tilt table tilts s full 90 degress. Calibrated indicator shows degree of tilt has accurately planed top

Dimensions (L x W x H)

  1. 810*710*610 m/m (Large size)
    Application:TPR-C1250A/C1600/1600H
  2. 510*510*590 m/m (small size)
    Application:TPR-720A-1600H
  1. Lead Screw
  2. Column
  3. Main Motor (7.5HP)
  4. Electrical Control Box
  5. Hydraulic Pump Motor (1HP)
  6. Hydraulic Flow Distributing Value
  7. Cooling Pump (1/8 HP)
  8. Working Table
  9. Base