Hydraulic Clamping Radial Arm Drill TC-1600H

Hydraulic Clamping Radial Arm Drill Machinery TC-1600H
  1. The Radial Drill Arm adopts IC Timer with advantage of one bottom press, it can automatically release up/down movement, stop, and automatically clamping easy to operate. The spindle can still maintain in original set after the tools change.
  2. Special arm elevating safety device is provided to prevent arm from falling down abruptly after year of usage. It will keep us from injurious dropping whenever the copper nut is excessively worn.
  3. Column,Arm, Gear box can clamp at same time by a psuh button.
MODEL TC-1600H  
Dai.of column 320 A
Distance from column surface to spindle center , Max 1650 D+C
Distance from column surface to spindle center , Min 330 C
Travel of spindle head 1320 D
Distance from base surface to spindle end , Max 1405 E
Distance from base surface to spindle end , Min 465 F
Elevating height of Arm 670 E-F-I
Effective area of box table 630x500x500 L×K×H
Dimension of base 2550x970x200 R×S×Q
Taper hole spindle MT#5  
Stroke of spindle 270 I
R.P.M of spindle (rpm x steps) 50HZ 37-1253×12 steps  
60HZ 44-1500×12 steps  
Feed of spindle (rev. x steps) 0.06, 0.10, 0.20x3 steps  
Main motor  (HP) 5 (two speed motor)  
Elevating motor (HP) 2HP  
Hydraulic clamping motor (HP) 1 HP  
Coolant equipment (HP) 1/8 HP  
Machine height from floor (Max.) 2790 M
Base + column height 2190 G
Net weight (approx)kgs 3300 (kg)  
S Shipping weight (approx)kgs 3650 (kg)  
Shipping dimensions (LxWxH) 2700×1130×2430  
Capacity Drilling Stell 50Φ  
Cast iron 60Φ  
Tapping Stell 40Φ  
Cast iron 50Φ