VMC-168DH/VMC-188DH 3 Axes Linear Ways Vertical Machining Center

3 Axes Linear Ways Vertical Machining Center
  1. 24/24/20 M/min. rapid traverse rates on X, Y, Z- axis are able to meet high speed machining requirements.
  2. Z-axis is mounted with two pieces of 55 mm wide roller type linear ways, featuring high rigidity and heavy load resistance.
Y-axis is equipped with 4 pieces of 45 mm wide roller type linear ways.
X-axis is equipped with 2 pieces of 45 mm wide roller type linear ways combined with the use of 6 blocks.
  Item Utit VMC-168DH VMC-188DH
Travel X-axis travel mm 1600 1800
Y- axis travel mm 850 850
Z- axis travel mm 700 700
Spindle Nose to Table mm 150 ~ 850 150 ~ 850
Spindle Center to Column Face mm 930 930
Table Working surface mm 1800 x 850 1900 x 850
T-slots (width*number*pitch) mm 18 * 5 * 150 18 * 5 * 150
Max. table load kg 2000 2500
Spindle Spindle speed rpm 10000 / 15000 10000 / 15000
Transmission   Direct-drive Direct-drive
Spindle nose taper   BBT50 / BBT40 BBT50 / BBT40
Feed Rapid traverse
(X,Y,Z-axis)
M/min 24 / 24 / 20 24 / 24 / 20
Cutting feed rate M/min 1 ~ 12 1 ~ 12
Auto Tool Changer Tool storage capacity pcs 24 (32 Opt.) 24 (32 Opt.)
Tool change time
(tool to tool)
sec. 3.5 3.5
Max. tool diameter /
adj. empty tool
mm 110 / 210 110 / 210
Max. tool length mm 300 300
Max. tool weight kg 15 15
Miscellaneous Coolant tank capacity L 330 330
Electric power required KVA 35 35
Air pressure required kg/c㎡ 6 6
Machine dimensions
(W*L*H)
mm 4260 x 4420 x 3390 4600 x 4420 x 3375
Machine weight kg 15500 15500

Standard

  • Fully enclosed splash guard
  • Twin chip augers
  • Telescopic guards on three axes
  • Heat exchanger for electrical cabinet
  • Spindle oil cooler
  • Cutting air blast device(M07 program controlled)
  • Coolant system
  • Flushing devices at both sides
  • Automatic lubrication system
  • MPG handwheel
  • Air blast through spindle
  • Transformer for external power
  • Oil fluid separator (specific gravity type)
  • Leveling bolts and blocks
  • Warning lamp
  • Coolant gun and air gun
  • Fluorescent lights at both sides
  • Auto power off
  • RS-232 interface port
  • Adjustment tools with tool box
  • Accuracy inspection report
  • Machine operation and maintenance manual
  • Electronic book for FANUC program maintenance and operation manual

Optional

  • Flushing devices at both sides (Independent coolant pump optional)
  • Coolant device through tool holder
  • 24/32 tool magazine
  • Lifting type chip conveyor
  • Air conditioner for electrical cabinet
  • CNC rotary table (4th axis)
  • Automatic tool length measuring device
  • Automatic workpiece measuring device
  • High speed data server
  • AICC2 high speed high accuracy control
  • Linear scales on three axes
  • Oil mist device
  • Oil mist collector
  • Disk type oil skimmer
  • Coolant through spindle and external-mount filtrating coolant tank
  • Working step